Operating elements
|
Please move your mouse at the numbering of the image, to get information about the operating elements in detail. |
|
Before you start, check that the angle limiters are adjusted according to your physician's recommendations. Both sliders must have the same angle limiter adjustment. Through various settings of the angle limiter it is possible to determine the minimum and maximum positions for bending and stretching. To set, press the stops outwards and set the desired values. Let the stops click into position Basic setting: Upper stop 9 (approx. 90°) Caution: The numbers printed on are approximate values only. Exact angle details must be measured at the knee of the patient. >> show Video about Angle limiter When activating the slider release mechanism, sliders can be adjusted to the length of the patient's legs. Basic setting: Press the "banana-shaped button" and move the sliders into the desired postion. Release the "banana-shaped button" >> >> show Video about Slider release mechanism Enables the resistance for foot stretching to be changed. The resistance can be changed by varying the tension of the orange rubber band. Hook in rubber band at bottom – low resistance in ankle joint Hook in rubber band at top - high resistance in ankle joint Basic setting: Rubber band attached to lowest notch (low resistance)k >> show Video about Foot stretch resistance By turning the positioning wheel the desired movement resistance can be set. The set value (0-3) can be read from the position marked. Basic setting: 0 (no resistance) >> show Video about Resistance adjustment Please move your mouse at the numbering of the image, to get information about the operating elements in detail. |
Contact
International partner
Operation instruction
My rehab
How to get CAMO®ped?
Studies & Co.
Questions and Answers

